Crema Cache
Head to head

Breville Dual Boiler vs Profitec Pro 300

Both used dual boilers have a PID and a 58mm group. The Breville packs in electronics, the 10-inch Profitec keeps it simple, and that decides repairs.

Side by side

Breville Dual Boiler
Profitec Pro 300
Verdict
Inspect before you buy
Buy used with confidence
Type
Dual boiler
Dual boiler
Years
Not listed
Not listed
Steam + brew
At once
At once
Brew boiler
0.3 liter stainless steel, PID controlled
0.3 L brass, PID controlled
Steam boiler
0.95 liter stainless steel, adjustable from 265 to 285°F
0.75 L stainless steel, can be switched off
Group
Electrically heated group, 58mm portafilter
58mm ring group, warmed by the brew boiler mounted right above it (not an E61)
Pump
Two pumps, a 15 bar main pump with an over-pressure valve and a small pump that fills the steam boiler
Vibration pump on rubber mounts
Water
84 oz tank
2.8 L tank with low-water shut-off; can't be plumbed in
US version
BES920XL, 120V, 1700 watts
115V, 1600W

How to choose

Step up from a single boiler and these are often the first two dual boilers you'll weigh. Each has separate brew and steam boilers, a PID, a vibration pump, a reservoir and a 58mm portafilter, so you can steam milk while the shot runs. They take very different approaches inside.

Breville Dual Boiler

Breville sells it as the BES920, with dual stainless boilers and a heated group, all under PID control, and low-pressure pre-infusion. The pre-infusion is programmable, and it has a shot clock, an 84 oz top-fill reservoir, an adjustable steam temperature from 265 to 285°F, a pressure gauge, and a body about 16 inches wide. It's packed with electronics, and that's where its strengths and its risks both sit. You get programmable shot volume and pre-infusion, but a failed board or sensor means hunting for Breville parts.

Profitec Pro 300

Profitec is a German company from Bammental and a sister company of ECM. The Pro 300 has an 11 oz brass brew boiler, a 25 oz stainless steam boiler, a Gicar PID with a shot timer, adjustable brew pressure and a 101 oz reservoir. The brew boiler sits right above the group and heats it, so it's ready in about 10 minutes from cold. You can switch the steam boiler off on espresso-only days. It's about 10 inches wide, which is a big saving on counter space.

Where they differ

The Breville gives you more programming, and its heated group with its own PID keeps brew temperature steady. The Profitec is simpler, more mechanical and narrower, with a steam boiler you can turn off. If you make several milk drinks back to back, keep in mind the Profitec's steam boiler holds 25 oz, which is small next to an HX or a big dual boiler.

Screens on one, gauges on the other

On a Breville, ask for a photo of the screen showing temperatures and the shot clock working, and ask for a video of the steam wand at full power. Ask whether it was descaled the way Breville's manual describes. On a Profitec, ask for a video of the PID display reaching temperature and the steam gauge climbing once the steam boiler is on. For both, look for water staining under the drip tray and around the group.

Which to pick

If you like settings and want the most control for the space, buy the Breville and check the electronics hard. If you want a simple machine you can fix with standard parts for years, buy the Pro 300.