Crema Cache
★ Rocket EspressoDual boiler★ Used buyer's guide★ Rocket EspressoDual boiler★ Used buyer's guide
The used buyer's guide to the

Rocket R58

Rocket's first dual boiler. An E61 group, a rotary pump and plumb-in option, with temperatures set from a detachable PID controller that plugs into the side.

Rocket R58 dual-boiler E61 espresso machine in polished stainless steel with black R knobs, two front gauges and portafilter locked in, three-quarter front view
Representative photo — AI-generated from real seller photos. Individual listings vary. How we make these →
OUR VERDICT
Buy it used

Make sure the detachable PID controller comes with it. If it does, the rest is familiar E61 dual-boiler hardware with a rotary pump, and easy to own.

Buying guide

Which one to buy

Snapshot · Oct 19, 2026

Any R58 works as long as the PID controller comes with it. Only one used R58 is in the US, a Cinquantotto at $2,499 delivered from Seattle Coffee Gear's outlet. The rest are open-box, new or imported, typically $2,625–3,800 delivered. Listen for a smooth, quiet rotary pump in a shot video, and if it was plumbed in, ask what filter was on the line.

Listed now
27
For parts
1
Typical ask
$2,625–$3,800
Full range
$1,724–$6,043

Delivered prices include shipping as eBay quoted it to a US address on Oct 19, 2026. Many sellers charge by distance, so your total may differ; eBay shows your exact total before you buy.

Snapshot

Live on eBay right now

8 of 27 listed

Captured . Some will have sold.

Delivered prices include shipping as eBay quoted it to a US address on Oct 19, 2026. Many sellers charge by distance, so your total may differ; eBay shows your exact total before you buy.

Prices and stock change daily. The live search shows everything listed now.

View all on eBay ↗

The short version

What it is

Rocket's first dual boiler. An E61 group, a rotary pump and plumb-in option, with temperatures set from a detachable PID controller that plugs into the side.

Who it's for

Fans of the classic E61 look who want a dual boiler to plumb in, and don't mind the temperature controls living off the machine.

Group
E61, 58mm
Brew boiler
0.58 L
Steam boiler
1.7 L on the Cinquantotto; Rocket lists 1.8 L for the R58 TUNE
Pump
Rotary
Temperature control
Detachable PID controller that plugs into the side (touchscreen on the Cinquantotto)
Water
2.5 L tank or plumbed in
US version
120V, 15A

Things to weigh

1

The PID controller is a separate unit on a cable. Without it you can't change temperatures, and a replacement display kit costs real money.

2

The Cinquantotto revision brought a touchscreen controller and angled feet. The current R58 TUNE adds a heated E61 group, a color display and 3-bar Tune pre-infusion.

3

Its 1.7 L steam boiler is a bit smaller than the 2 L boilers in the Synchronika and Pro 700.

4

The R60V is a different machine with pressure profiling. Check the badge before you buy.

The inspection punch-list

Red means walk away. Yellow means budget for it. Green is a good sign.

RedPID controller: Check the photos show the PID controller and its cable, powered on. It should show brew and steam temperatures.
YellowBrew pressure: Ask for a video of a shot. The group pressure gauge should climb and hold steady.
YellowRotary pump: Listen to the pump in the video. It should run quiet and smooth without squealing.
YellowWater filter: Ask whether it was plumbed in and what filter was on the line. You want a named filter or softener.
GreenPlumb-in adapter: Look in the photos for the adapter that came in the box. Having it saves you hunting for fittings.
RedWater and descaling: Ask what water the machine ran on and how often it was descaled. Filtered or softened water and a named descaling routine are what you want.Scale clogs valves and boilers and is the hardest damage to see in photos.
RedLeaks: Ask for photos under the cup tray and drip tray. Fittings should be dry, with no green or white crust.Green crust on copper and brass means a slow leak or heavy scale.
RedVoltage: Read the voltage on the rating plate in the photos. A US kitchen needs 110-120V, and a sideways prong on the plug means it needs a 20-amp outlet.A 220-240V European machine won't run on a standard US outlet.
YellowGroup seal: On arrival, lock in the portafilter. The handle should seal before it swings far past center, and the shower screen should be clean and flat.Gaskets and screens are cheap wear parts. Budget for both.
YellowShot: Ask for a video of a shot. The pump should hum steadily and coffee should flow as an even stream after a few seconds.A rattle, a weak trickle or a pump that never builds pressure points to a worn pump or a clog.
GreenParts availability: Before you buy, find a gasket and shower screen for the exact model at a parts retailer. You want both in stock.If parts are easy to buy, repairs stay simple.

History and versions

The R58 was Rocket's first dual boiler and Whole Latte Love says it was the first US shop to carry it. Rocket kept the classic Rocket look by moving the temperature controls off the front. Every R58 sets brew and steam temperatures from a detachable PID controller that plugs into the side, so the face stays clean. Inside there's an E61 group, a 0.58 L brew boiler, a steam boiler of about 1.7 L and a rotary pump that runs from the tank or a water line. Rocket revised it more than once. After the original came a V2, then the Cinquantotto, with a touchscreen controller and angled feet. The current R58 TUNE swaps in a heated E61 group that warms up in about 12 minutes, a color display, push-turn knobs and Tune pre-infusion at 3 bar. For a used buy, any version works if the controller is there and the boilers are clean.

Also worth a look

What else you'll need

Links go straight to eBay and Amazon, with no tracking. We earn nothing from them.

Espresso grinder

58mm portafilters and baskets (58mm machines only)

Prep tools

Cleaning and water

Questions buyers ask

What's the difference between an R58 and an R58 Cinquantotto?

The Cinquantotto is a later revision with a touchscreen PID controller and redesigned angled feet. The E61 group, dual boilers and rotary pump stay the same idea.

Can I use an R58 without its PID controller?

The controller is how you set brew and steam temperatures, so a machine without it is incomplete. Replacement display and cable kits are sold, but it's an expense you can avoid.

Is the R58 TUNE the same machine?

It's the newest R58, with a heated E61 group, a full-color display and Tune pre-infusion at a fixed 3 bar. It still has two PID boilers and can be plumbed in.

Sources