Crema Cache
★ AscasoThermoblock★ Used buyer's guide★ AscasoThermoblock★ Used buyer's guide
The used buyer's guide to the

Ascaso Dream

A retro aluminum-bodied thermoblock machine from Barcelona, designed by Marc Aranyó in 2000. Today's Dream PID and Dream ONE take a 58mm portafilter.

Ascaso Dream PID espresso machine in white with polished chrome base, wooden portafilter handle and steam knob, three-quarter front view
Representative photo — AI-generated from real seller photos. Individual listings vary. How we make these →
OUR VERDICT
Inspect first

It's a capable little machine, but Dreams have changed inside over the years, so pin down which version it is and ask for a video of it brewing and steaming.

Buying guide

Which one to buy

Snapshot · Oct 20, 2026

The Dream's aluminum body is the thing to inspect, so check the photos for chips and corrosion. Most listed now are the current Dream PID, and complete ones ask $650–1,250 delivered, with open-box dealer stock at the top. The analog Dream MF from the mid-2000s gets you in from $357. If a listing doesn't say PID or ONE, ask for the rating plate.

Listed now
34
For parts
0
Typical ask
$650–$1,250
Full range
$305–$1,439

Delivered prices include shipping as eBay quoted it to a US address on Oct 20, 2026. Many sellers charge by distance, so your total may differ; eBay shows your exact total before you buy.

Snapshot

Live on eBay right now

8 of 34 listed

Captured . Some will have sold.

Delivered prices include shipping as eBay quoted it to a US address on Oct 20, 2026. Many sellers charge by distance, so your total may differ; eBay shows your exact total before you buy.

Prices and stock change daily. The live search shows everything listed now.

View all on eBay ↗

The short version

What it is

A retro aluminum-bodied thermoblock machine from Barcelona, designed by Marc Aranyó in 2000. Today's Dream PID and Dream ONE take a 58mm portafilter.

Who it's for

Buyers who want the color and the shape as much as the coffee, and who make a drink or two at a time.

Heating
Single thermoblock (insulated on the Dream PID)
Portafilter
58mm stainless steel (current Dream PID and Dream ONE)
Temperature control
Dream PID 80-110C in 1C steps; Dream ONE 90-106C in 2C steps
Pump
Vibratory, with manometer and external OPV
Water
1.3L removable tank
Body
Aluminum, polished or painted
US version
120V; Dream PID 1100W, Dream ONE 1050W

Things to weigh

1

The Dream heats with a single thermoblock, so it brews and steams from the same heater in turn.

2

The current range is two machines. The Dream PID has a screen, volumetric control, a shot timer and coffee temperature from 80C to 110C in 1-degree steps. The Dream ONE sets coffee from 90C to 106C in 2-degree steps and has a fixed steam temperature.

3

The body is polished or painted aluminum, so look hard at the photos for chips and scuffs in the finish.

4

The 1.3L tank is small, so you'll refill it often if you make a lot of drinks.

The inspection punch-list

Red means walk away. Yellow means budget for it. Green is a good sign.

YellowRating plate: Ask for a photo of the plate. It tells you whether it's a Dream PID, a Dream ONE or an older Dream.
YellowBasket size: Ask what basket size it takes before you buy accessories. Current Dreams use 58mm, so confirm it on an older one.
RedShot and steam: Ask for a video from a cold start to a shot and then steam. Steam should come out strong without long spells of sputtering water.
YellowBody finish: Check the aluminum body in the photos, especially around the drip tray. You want no chipped paint or corrosion.
YellowGroup: Ask for a close photo of the group. You want a clean shower screen and a gasket that isn't cracked or rock hard.
RedWater and descaling: Ask what water the machine ran on and how often it was descaled. Filtered or softened water and a named descaling routine are what you want.Scale clogs valves and boilers and is the hardest damage to see in photos.
RedLeaks: Ask for photos under the cup tray and drip tray. Fittings should be dry, with no green or white crust.Green crust on copper and brass means a slow leak or heavy scale.
RedVoltage: Read the voltage on the rating plate in the photos. A US kitchen needs 110-120V, and a sideways prong on the plug means it needs a 20-amp outlet.A 220-240V European machine won't run on a standard US outlet.
YellowGroup seal: On arrival, lock in the portafilter. The handle should seal before it swings far past center, and the shower screen should be clean and flat.Gaskets and screens are cheap wear parts. Budget for both.
YellowShot: Ask for a video of a shot. The pump should hum steadily and coffee should flow as an even stream after a few seconds.A rattle, a weak trickle or a pump that never builds pressure points to a worn pump or a clog.
GreenParts availability: Before you buy, find a gasket and shower screen for the exact model at a parts retailer. You want both in stock.If parts are easy to buy, repairs stay simple.

History and versions

Ascaso started in Barcelona in 1962, when J. Ascaso set up to make and distribute spare parts for espresso machines. His son, JL. Ascaso, took the company into building machines. The Dream came from designer Marc Aranyó in 2000, and Ascaso says it hasn't changed a line of the silhouette since, only the technology inside. Today's Dream PID and Dream ONE share the aluminum body, a vibratory pump, a 10mm cool-touch steam wand, a 1.3L tank, a brew gauge and a 58mm portafilter. The PID version adds a screen, volumetric control, a shot timer, an insulated thermoblock and walnut handles. Older Dreams vary, so ask which one it is before comparing listings. If you care about temperature, the PID is the Dream to get.

Also worth a look

What else you'll need

Links go straight to eBay and Amazon, with no tracking. We earn nothing from them.

Espresso grinder

Prep tools

Cleaning and water

Questions buyers ask

Is the Ascaso Dream a boiler machine?

No. Ascaso lists it as a single thermoblock machine, so it heats water on the way through and brews and steams in turn.

What's the difference between the Dream PID and the Dream ONE?

The PID has a screen with 1-degree temperature control for coffee and steam, volumetric control, a shot timer, an insulated thermoblock and walnut handles. The ONE has 2-degree coffee steps and a fixed steam temperature.

Sources