Crema Cache
★ ProfitecHeat exchanger★ Used buyer's guide★ ProfitecHeat exchanger★ Used buyer's guide
The used buyer's guide to the

Profitec Pro 500

Profitec's E61 heat exchanger with a big 2 liter stainless boiler. Most used ones have the PID, which sets the boiler and so nudges your brew temperature.

Profitec Pro 500 E61 heat-exchanger espresso machine in polished stainless steel with two front gauges and portafilter locked in, three-quarter front view
Representative photo — AI-generated from real seller photos. Individual listings vary. How we make these →
OUR VERDICT
Buy it used

It's a stainless-boiler E61 with a vibe pump and a simple PID, so a clean one rarely needs more than descaling and a gasket kit.

Buying guide

Which one to buy

Snapshot · Oct 19, 2026

The Pro 500 to look for is the 2022-or-later PID, with its display on the front. Nobody's selling a used one in the US. The only listing is a new Australian PID machine at $4,132 delivered, $1,563 of it freight, and it's 240V, so it won't plug into a US outlet. Wait for a US one.

Listed now
15
For parts
0
Typical ask
$4,125–$4,150
Full range
$2,569–$2,569
Snapshot

Live on eBay right now

1 of 15 listed

Captured . Some will have sold.

Delivered prices include shipping as eBay quoted it to a US address on Oct 19, 2026. Many sellers charge by distance, so your total may differ; eBay shows your exact total before you buy.

Prices and stock change daily. The live search shows everything listed now.

View all on eBay ↗

The short version

What it is

Profitec's E61 heat exchanger with a big 2 liter stainless boiler. Most used ones have the PID, which sets the boiler and so nudges your brew temperature.

Who it's for

Anyone who's outgrown a small E61 box and wants more boiler, plus a temperature they can actually set.

Group
E61, 58mm portafilter
Boiler
2 liter stainless steel heat exchanger
Pump
Vibration pump on isolating mounts
Temperature control
Pressurestat on the original; PID on the Pro 500 PID, set from 80 to 128°C
Water
About 2.8 liter tank
Heating
1400 watts

Things to weigh

1

The PID sets boiler temperature, and brew temperature follows it. Profitec's manual prints a table of boiler settings and the brew temperatures they give, so you can dial in by number instead of by flush.

2

Earlier PID machines hide the display behind the drip tray. The 2022 update moved it to the front and added a shot timer, which is nicer to live with.

3

Some later machines carry the flow control option on top of the group. Look for the extra knob in photos if you want to play with flow.

4

There's no dual boiler Pro 500. A listing that says dual boiler is a different Profitec, such as the Pro 700.

The inspection punch-list

Red means walk away. Yellow means budget for it. Green is a good sign.

YellowVersion: Look at the front panel in the photos. A display on the face means a 2022 or later PID, and no front display means an earlier PID or the original pressurestat model.Ask the seller to pull the drip tray if you can't tell.
RedBoiler pressure: Ask for a photo of the gauge after warm-up. It should read about 1.0 to 1.25 bar.
RedPID display: On a PID machine, ask for a photo of the display at temperature. It should show the set temperature and hold it.A blank or drifting display means a controller or probe problem.
YellowE61 lever: Ask for a video of a shot. The lever should move smoothly and stop the flow cleanly.
GreenWater history: Ask what water the machine ran on. Filtered or softened water and a descale record are good signs.
RedWater and descaling: Ask what water the machine ran on and how often it was descaled. Filtered or softened water and a named descaling routine are what you want.Scale clogs valves and boilers and is the hardest damage to see in photos.
RedLeaks: Ask for photos under the cup tray and drip tray. Fittings should be dry, with no green or white crust.Green crust on copper and brass means a slow leak or heavy scale.
RedVoltage: Read the voltage on the rating plate in the photos. A US kitchen needs 110-120V, and a sideways prong on the plug means it needs a 20-amp outlet.A 220-240V European machine won't run on a standard US outlet.
YellowGroup seal: On arrival, lock in the portafilter. The handle should seal before it swings far past center, and the shower screen should be clean and flat.Gaskets and screens are cheap wear parts. Budget for both.
YellowShot: Ask for a video of a shot. The pump should hum steadily and coffee should flow as an even stream after a few seconds.A rattle, a weak trickle or a pump that never builds pressure points to a worn pump or a clog.
GreenParts availability: Before you buy, find a gasket and shower screen for the exact model at a parts retailer. You want both in stock.If parts are easy to buy, repairs stay simple.

History and versions

Profitec is the sister brand of ECM, the German company Wolfgang Hauck founded in 1996. The Pro 500 is its E61 heat exchanger, with a 2 liter stainless boiler, a vibe pump on isolating mounts and a tank. It started with a mechanical pressurestat. The PID version followed and became the one people shop for, with the controller display tucked behind the drip tray. In 2022 Profitec moved that display to the front, redesigned the brew and steam gauges and turned the display into a shot timer. Later machines could also be had with flow control on the group. Get a PID machine, and if you'll glance at the display every day, the 2022 layout puts it where you can see it.

Also worth a look

What else you'll need

Links go straight to eBay and Amazon, with no tracking. We earn nothing from them.

Espresso grinder

58mm portafilters and baskets (58mm machines only)

Prep tools

Cleaning and water

Questions buyers ask

Should I buy the PID or the non-PID Pro 500?

Get the PID if you can. It lets you set the boiler by number, and Profitec's manual maps those settings to brew temperature, so you're not guessing with flushes.

Does the PID control brew temperature directly?

No. It controls the boiler, and the heat exchanger and group follow it. Changing the setting moves both steam pressure and brew temperature, and the group takes a while to settle after a change.

How do I tell a 2022 Pro 500 from an older one?

Look at the front. The 2022 update put the PID display on the face of the machine and doubled it as a shot timer, while older PID units hide it behind the drip tray.

Sources