Most used espresso machines that fail do it from the inside, so the inspection starts with questions and photos long before you touch the machine. Here's the order we'd do it in, for local pickup and for shipped Buy It Now listings alike.
Ask the seller these questions first
- Ask what water went in it. Softened or filtered water, ideally with a named filter, is the answer you want. Plain tap water in a hard-water area is the warning sign.
- Ask if they ever used straight distilled water. Very pure water can corrode metal parts and confuse the conductivity probes some machines use to sense the boiler level.
- Ask when it was last descaled, with what, and who did it. On a heat exchanger, a technician's descale is a better answer than a monthly vinegar run, because loosened scale can block narrow passages in that design.
- Ask when the group gasket and shower screen were last replaced. A recent replacement means someone was looking after it.
- Ask why they're selling and roughly how many drinks a day it made.
- Ask whether it has ever been repaired, and for any receipts from a service shop.
Photos and video to request
Ask for these before you commit. A seller with a healthy machine can usually send them the same day.
- The rating plate, close enough to read the voltage, frequency and watts. You want 120V or 115V and 60Hz for a US outlet.
- The group from underneath, with the portafilter out, so you can see the gasket and shower screen.
- The machine with the top cover off, showing the boiler fittings, if they're comfortable removing it.
- The steam wand tip and the base of the wand.
- The inside of the water tank.
- A short video from cold that shows the power coming on, the gauge climbing, a shot running and the steam wand opening.
Reading a Buy It Now listing
Read the title and description for "untested", "as is" and "for parts". Those words mean the seller won't stand behind it, so price the machine as a project.
Look for white, chalky crust around the steam wand base, the hot water tip, the group and the drip tray area. That's mineral scale, and if it's on the outside there's probably more inside.
Check that the photos show a running machine. A lit power light and a gauge off zero tell you it at least heats. A machine shown only cold, or only in stock photos, tells you nothing.
Count the accessories in the photos. Missing portafilters and baskets are easy to replace on 58mm machines and slower to find for 53mm La Spaziale or 54mm Breville groups.
Testing at pickup, step by step
Ask the seller to leave it cold and unplugged until you arrive, so you see the real start-up.
- Read the rating plate before you plug it in. It should say 120V or 115V and 60Hz.
- Fill the tank and switch it on. The pump should run briefly to fill the boiler and then stop.
- Watch the gauge on a heat exchanger or dual boiler. It should climb steadily and then settle, with the heating light cycling on and off.
- Listen as it heats. A short hiss from the anti-vacuum valve early in warm-up is normal, but steam or water still leaking from it once the machine is hot means it needs service.
- Give an E61 machine its warm-up. The group takes 20 to 30 minutes to heat fully, so wait that long before you judge the shots.
- Run water through the group with no portafilter. It should flow steadily, and a weak trickle points to a blockage such as a scaled gicleur.
- Lock in the portafilter. It should stop firmly, and a handle that swings well past center means the gasket is worn.
- Pull a shot or run a blind basket on a machine with a brew gauge. Look for a reading near 9 bar, which is the brew pressure Chris' Coffee recommends.
- End the shot and watch the drip tray. A machine with a three-way solenoid should give a quick release of water into the tray.
- Open the steam wand after the first spit of water. It should settle into a strong, dry stream that holds.
- Sniff around the vents and the back of the machine. A hot electrical or burning smell is a reason to leave.
- Look under the machine and at the counter when you're done. It should be dry, with no drips or mineral trails.
When a machine arrives by mail
Photograph the box before you open it if it's damaged, because a shipping claim needs that evidence.
Run the same test on day one. eBay's Money Back Guarantee gives you 30 days after delivery to open a request for a machine that arrives broken or not as described, and it doesn't help if you wait past that window.
Don't make a descaling cycle your first move on a heat exchanger you suspect is scaled, since the loosened scale has to go somewhere. Check the manual or call a shop.
If anything in the test fails, message the seller through eBay the same day so the record sits with your order. For what the crust and the parts tell you, read how to spot scale damage.
Machines in this guide

Rancilio Silvia
It's built from commercial-grade parts and is one of the best-documented home machines ever made, so even a tired one can usually be put right.
Checklist and listings for the Rancilio Silvia →
Rocket Appartamento
The standard and Serie Nera are pressurestat E61 boxes with a vibe pump and almost no electronics, so a descaled one with fresh gaskets has little left to go wrong.
Checklist and listings for the Rocket Appartamento →
Profitec Pro 500
It's a stainless-boiler E61 with a vibe pump and a simple PID, so a clean one rarely needs more than descaling and a gasket kit.
Checklist and listings for the Profitec Pro 500 →
Lelit Bianca
It's a strong used buy, but the flow-control valve and the LCC board are two extra things to see working on video.
Checklist and listings for the Lelit Bianca →
Breville Bambino Plus
Owners keep them going for years, but Breville tells you not to open it for service, so you're buying on how it runs today.
Checklist and listings for the Breville Bambino Plus →Frequently asked
What if the seller won't power it on for me?
Treat it as untested and price it as a project that might need a full rebuild. A working machine takes a few minutes to switch on, so a refusal usually means the seller already knows something.
How long should a pickup test take?
Plan on about half an hour for an E61 machine, because a full group warm-up takes 20 to 30 minutes. Thermoblock machines like the Breville Bambino Plus heat in seconds, so their test is much quicker.
Should I descale a used machine as soon as I get it?
Follow the manual for that model. On a heat exchanger with unknown history, loosened scale can block narrow passages, so a technician is the safer first stop.